How to buy in Canada+custom rubber wristbands

ar with the characteristics of product materials and production process , so the products produced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .      

n ,luggage tag ,silicone wristband and so on . There are many kinds of styles of pvc keychain and luggage tag .The silicone wristband also have many kinds of styles ,such as embossed wristband , embossed printed wristband ,debossed wristband and so on .Different style of the silicone wristband will show different effect to us .For example ,the effect of the logo of the embossed custom silicone wristbands is raised on the band surface .Contrary to the embossed custom silicone wristbands ,the effect of the logo of the debossed wristband is sunken .Most customer choose to order debossed wristband .The reason is the logo on the debossed wristband can be kept for a long time ,and the color of the logo is same as the wristband color .   About the production of debossed wristband ,we have two manufacturing process .The first manufacturing process is make a mold and use it to produce the debossed wristband .The other manufacturing process is produce the blank wristband first and then laser the logo on the wristband .If the customer want to order debossed wristband ,the thickness of the line of the logo need to reach 0.3mm at least ,otherwise the mold can’t be produce out . So when we receive the order from customer ,we will make a digital procustom rubber wristbandss://www.silicone-wristbands.co.uk/custom-rubber-wristbands">custom rubber wristbandsof for customer .If the thickness of the line of the logo does not reach 0.3mm ,we will adjust the proof and send it to customer to confirm .We will start the mass production until the customer confirm the digital proof . embossed-wristbanddual-layer-wristband

cheap custom bracelets